How to Add a Printer in Windows 11 (and What to Do When the Wizard Can't Find It)

To add a printer in Windows 11, connect it to the same Wi-Fi network as your PC or plug in its USB cable, then open Settings › Bluetooth & devices › Printers & scanners, click Add device and choose your printer when it appears. If the list stays empty, click Add manually and add it by IP address, which works even when discovery is blocked.

How to add a printer in Windows 11 (the normal way)

Before you start, make sure the printer is switched on, has finished its start-up routine and is already on your Wi-Fi network. If it has never been connected, do that first from the printer's control panel or the brand app; our wireless printer setup guide walks through it. Windows 11 installs most printers with its built-in driver, so there is usually nothing to download.

Add a Wi-Fi or network printer

1. Open Settings (Windows key + I) and go to Bluetooth & devices › Printers & scanners.
2. Next to Add a printer or scanner, click Add device. Windows searches your network for a few seconds.
3. When your printer appears, click Add device beside its name. Windows sets it up and it moves into your list of printers.
4. Click the printer in the list and choose Print test page to confirm it works.

If your printer isn't listed: Add manually

When the search finishes without your printer, a line reading The printer that I want isn't listed appears with an Add manually link. Click it, then choose Add a printer using an IP address or hostname. You will need the printer's IP address, which you can print from its control panel or read from your router's device list; see how to find your printer's IP address. The full walkthrough, including which device type to pick, is in Fix 2 below.

Add a USB printer

1. If you want scanning or other all-in-one features, install the manufacturer's full software package first. For printing alone it is optional.
2. Turn the printer on and plug the USB cable directly into the PC rather than into a hub or dock.
3. Windows usually detects the printer and adds it on its own within a minute. Check Settings › Bluetooth & devices › Printers & scanners.
4. If it does not appear, click Add device. If Windows still cannot see it, work through USB printer not detected.

Setting up a laptop, or adding the same printer to a Mac or Chromebook as well? Our guide to connecting a printer to a laptop covers Wi-Fi and USB on every system.

Quick fixes when the wizard finds nothing

When the Add device search sits there finding nothing, the printer is usually on the network and perfectly reachable; the wizard's discovery mechanism is simply being blocked. You do not need discovery to add a printer. Adding it manually by IP address takes about a minute and works in almost every case where the automatic route fails.

1. Print the printer's network configuration page from its control panel and note the IP address.
2. Set your network to Private: Settings › Network & internet › Wi-Fi › your network › Network profile type › Private.
3. Disconnect any VPN on the computer.
4. Go to Settings › Bluetooth & devices › Printers & scanners › Add device, wait, then click Add manually.
5. Choose Add a printer using an IP address or hostname and enter the address.

Why the wizard can't find your printer

The Add a printer wizard finds devices by broadcasting on the local network and listening for replies - WSD, mDNS and SSDP traffic. That traffic is exactly what network security features are designed to restrict.

A Windows network profile set to Public blocks it by design; this is the correct behavior in a coffee shop and the wrong behavior at home, and Windows frequently sets Public by default after a network change. Third-party firewalls block it too. Consumer VPN clients route all traffic through the tunnel, including local traffic, which makes the whole LAN invisible. And routers with client isolation or a guest network enabled prevent devices seeing each other at all.

Meanwhile, none of that stops printing. Once a printer port exists pointing at a known address, jobs go straight there. That is why manual addition works when discovery does not - it skips the part that is broken.

Fix 1: Find the printer's address

Every network printer prints its own configuration page:

• HP: Settings › Reports › Network Configuration Page
• Canon: Setup › Device settings › LAN settings › Print LAN details
• Epson: Settings › General Settings › Network Settings › Network Status › Print Status Sheet
• Brother: Menu › Print Reports › Network Configuration

On models with no screen, holding the Information or Wi-Fi button for a few seconds usually prints it. Note both the IP address and the MAC address - you will want the MAC for a reservation later.

Before adding, confirm the address responds. Open Terminal and run ping followed by the address. Replies mean the network path is fine and only discovery is broken. No replies mean the printer is not on your network, and you should work through printer not found during wireless setup first.

Fix 2: Add the printer manually

1. Open Settings › Bluetooth & devices › Printers & scanners and click Add device.
2. Wait for the search to finish - the Add manually link only appears afterwards. Click it.
3. Select Add a printer using an IP address or hostname and click Next.
4. Set Device type to TCP/IP Device, not Autodetect. Autodetect often creates a WSD port, which is far more fragile.
5. Enter the IP address in Hostname or IP address. The port name fills in automatically.
6. Uncheck Query the printer and automatically select the driver to use if you want to choose the driver yourself.
7. When prompted, pick your model from the manufacturer list, or click Have Disk and browse to the .INF file from an extracted vendor driver package.
8. Name the printer, decline sharing unless you need it, and print a test page.

Fix 3: Make discovery work, if you would rather

If you want the wizard to find printers properly - useful in an office with several - fix the blockers in this order:

1. Network profile. Settings › Network & internet › Wi-Fi › your network › Network profile type › Private.
2. Network discovery. Control Panel › Network and Sharing Center › Change advanced sharing settings › turn on network discovery for the Private profile.
3. Required services. In services.msc, confirm Function Discovery Provider Host, Function Discovery Resource Publication, SSDP Discovery and UPnP Device Host are running and set to Automatic or Manual (Triggered).
4. VPN. Disconnect it, or enable local network bypass in its settings.
5. Firewall. Pause third-party security software to test; if that fixes it, add allow rules rather than leaving protection off.
6. Router. Turn off client isolation and make sure the printer is on the main network, not the guest network.

Fix 4: Clear what is blocking the add itself

Sometimes the wizard sees the printer and the add fails anyway.

Restart the Print Spooler

Press Windows key + R, run services.msc, right-click Print Spooler and choose Restart. If the service stops on its own afterwards, no add will ever stick - fix that first via print spooler keeps stopping.

Clear a conflicting driver or port

An old driver package or a stale port with the same name will block a new install. Press Windows key + R, run printui /s /t2, and check both the Drivers and Ports tabs for leftovers from a previous attempt. Remove them, choosing to remove the driver and package, then reboot. On Windows 11 Pro, printmanagement.msc gives a fuller view of the same information.

Run the troubleshooter

Settings › System › Troubleshoot › Other troubleshooters › Printer. It resets the spooler, clears the queue and re-detects devices, and it fixes a reasonable share of add failures on its own.

Fix 5: "Windows cannot connect to the printer"

This specific error nearly always involves a printer shared from another PC. The client is trying to pull the driver from the host and failing - often because of driver architecture mismatches or Windows' tightened restrictions on installing drivers from remote print servers.

The reliable answer is to stop treating it as a shared printer:

1. Install the printer's driver locally on your machine.
2. Add the printer as a local printer on a new Standard TCP/IP Port pointing at the printer's own IP address, not at the host computer.

Any network-capable printer should be connected to the network directly rather than shared through a PC. Sharing means the host must be awake, its spooler healthy, and its drivers compatible with every client - three fragile dependencies you do not need.

Fix 6: Add it without any vendor driver

From July 2026, new Windows 11 installations default to Windows Ready Print, the Mopria and IPP driverless stack. Almost every printer sold since about 2018 supports it. If a vendor driver is fighting you, adding the printer this way gets you printing immediately:

1. Add device, then Add manually, then Add a printer using an IP address or hostname.
2. Set device type to Web Services Device if offered, or use TCP/IP and let Windows select the built-in class driver.
3. Alternatively, choose Microsoft IPP Class Driver from the driver list.

The trade-off: driverless printing can omit automatic duplex options, tray and media selection, secure PIN release and scan-to-PC. Fine for a mono laser, limiting for an all-in-one. See driver is unavailable and scanner not working for what to install when you need those features back.

Make it stick afterwards

The reservation procedure is in printer keeps going offline, which is worth doing at the same time as the add - it prevents the most common follow-on problem.

Brand-specific notes

HP: HP Easy Start handles discovery, driver selection and setup in one pass and is usually cleaner than the Windows wizard. See our HP hub. Canon: the printer must have completed its own network setup before Windows can add it; check the Wi-Fi lamp is solid. Epson: the full package includes a network setup utility that can push settings over USB, useful when discovery is impossible. Brother: install the Full Driver and Software Package before adding, particularly on an all-in-one. Lexmark and Xerox: the universal drivers cover whole ranges and are the simplest route for older office models - see our Lexmark hub.

If nothing worked

If the printer does not answer a ping at its stated address, no add method will succeed and the problem is network-level, not Windows-level. Go back to the printer's own connection: is the Wi-Fi lamp solid, does the configuration page show a valid address on the same subnet as your computer, and is the printer on the main network rather than a guest one?

If the printer is reachable and Windows still refuses to add it after a clean driver removal, a spooler restart and a component repair with sfc /scannow and DISM /Online /Cleanup-Image /RestoreHealth, an in-place repair install of Windows 11 will resolve it faster than further troubleshooting. Nothing here is a hardware fault, so there is no repair-versus-replace question - only how much of your time the problem is worth.

If you would rather have someone identify what is blocking discovery and set the port up correctly for you, you can get help from a printer specialist over a screen share.